Home » Business » Small Business

Electrical Contractor San Francisco

Mar 19, 2017
California's Title 24 and New Lighting Standards in 2017

When it comes to raising the bar of sustainable living, California sure knows how to do it.
Qualifying for the top spot on American Council for an Energy-Efficient Economy (ACEEE)' State Energy Efficiency Scorecard for 2016, the state is known as the national leader in energy conservation and fighting climate change. The Article 24 part 6 of the California's business code specifically addresses the energy-efficiency in commercial and residential buildings. The code is revised every three years with the most recent changes rolled out in January 2017.

So, if you are an Electrical Contractor San Francisco or any other Californian county, you need to get a head start on article 24 part 6 and state's 2030 Zero Net Energy (ZNE) Building mission.

What is a Zero Net Energy Building?

The zero-net energy building consumes the same amount of energy as it produces, resulting in zero net energy consumption.
The ZNE reflects a standard for self-sufficient and self-reliant building infrastructure involving the combined efforts of electrical contractors, architects, engineers to adopt strategies of renewable energy production and conservation throughout the designing and operational cycles.
Making Buildings Better:

If you are a building owner or an electrical contractor in California, you need to know that these laws are making buildings better and more responsive to current climate challenges. The new lighting standards and distributed power metering have a higher upfront cost, but you should consider it regarding higher return on investment. The energy neutrality in the building will save operational and maintenance cost over the building lifecycle, resulting in higher returns.

Changes in Electrical Systems:

The article 24 part 6 expects the realtors to achieve energy neutrality in a nonresidential building which means that lighting and heating system of the building needs to be designed in an extremely sustainable manner.
For example, if the building is in San Francisco, the Electrical Contractor San Francisco should choose the lighting system, controls, sensors, and fixtures that minimize energy consumption. It is about time you should start reading the energy efficiency label on the electrical equipment.
The 2016 lighting standards require the installation of lighting fixtures, control panels, and other electrical equipment that minimizes waste in existing building. So, even the existing buildings need to synchronize their lighting with the code in the near future.
High Efficiency Lighting:
Overall, the electrical contractors need to integrate the ambient and artificial lighting together to build high-efficiency lighting system. The ambient lighting will be controlled by sensors and will be turned to achieve comfortable lighting level. The article 24 also sets forth the automated demand response which means that the residential lighting will be reduced during peak hours' load.

Occupancy Based Automatic Controls:

If you are an Electrical Contractor San Francisco, you have to use more occupancy based automatic shutoff controls in the building. It means that the lighting should turn off if no one is around in the room. The 2016 codes have introduced partial-on which means that in the case of occupancy, the lights will be partial on and not full on and the occupants should turn on additional lights manually.
Please Rate:
(Average: Not rated)
Views: 131
Print Email Share
Article Categories