|
|
Magnetic Locks Basics
What are magnetic locks? Magnetic locks are locks that use electromagnets and armature plates to lock a door. These types of locks are much more expensive than more conventional locks. A magnetic lock can cost as much as three hundred dollars or more. A conventional lock can be purchased for as little as forty dollars. You also need to know that using a magnetic lock costs money on your electric bill. Normally it will cost around three dollars a year to cover the electric charge of using a magnetic lock.
There some significant advantages to use magnetic locks as opposed to using conventional locks. For starters, it is impossible to pick a magnetic lock because it runs off electricity. These locks are safe being secured using a number of different coding mechanisms. They are also very reliable. Magnetic locks operating using twelve to twenty four volts of DC current. Some magnetic locks use batteries while others can be hooked using electric wiring.
Installing magnetic locks in your office or business will not secure your doors forever. While these locks are extremely safe and secure, you need to maintain them properly in order for them to work properly. These types of locks are fail safe meaning they need to be supplied with a contact source of power in order to stay locked. If a magnetic lock loses its power source then it will become unlocked. You need to make sure that your magnetic locks always have fresh batteries.
Magnetic locks come in many different types. For instance, some magnetic locks will be able to pull three hundred pounds while others will be able to pull twelve hundred pounds. Each type of lock is more suitable for a specific situation. For instance, a three hundred pound pull magnetic lock will work better for light duty security measures like securing a cabinet. If you want to secure a door then you will need to make sure to get a twelve hundred pound pull magnetic lock at least.
Magnetic locks provide a number of advantages. Conventional locks have interconnecting parts. Magnetic locks do not have any interconnecting parts. Since the magnetic lock does not have any interconnecting parts it is much easier to install than a conventional lock. Magnetic locks are also much more durable than conventional locks for the very same reason. Conventional locks tend to break down much faster than magnetic locks. This is why it is a good idea to use magnetic locks in high traffic access control areas.
Magnetic locks are installed inside the door frame to make sure that tampering with the lock is almost impossible. You need to be extremely careful during the installation process to ensure that the armature plate and the electromagnet are as closely aligned as possible to ensure efficient operation. You should take your time when install your magnetic locks to make sure that it is installed in a way that it will work effective and efficiently.
The main advantage of magnetic locks is their ability to be used as a part of an entire electronic security system. Many times a magnetic lock will be attached to a keycard reader. It is also possible for a magnetic lock to be hooked up to a computer that monitors an entire buildings security. The locking mechanism can then be controlled by anyone with access to the computer. From there you can lock and unlock the doors.
|
 |
Please Rate: |
|
Rating: |
 Processing ... |
(Average: Not rated) |
| Views: | 21 | |
|
| More Articles from Security | | |
| Top Articles in Security | | |
|
