|
|
How To Replace A Toilet Seat ?
Most home plumbing assignments are minor enough to be handled by even a novice provided that a predefined course of action is employed to accomplish the task.
Even an amateur with a bit of a logic can accomplish such tasks with ease. Before you kick off the campaign, make sure that all the necessary plumbing tools are kept abreast. The list would include the tools such as screwdrivers, pliers, wrenches and a roll of masking tape. In addition a hacksaw may be needed as well.
Before removing the old toilet seat, apprehend the shape (circular or elongated) and size of the new seat that would be bought. Keep in mind that the shape and size of the new seat must be similar to that of the old one in order to cover the toilet bowl completely.
Once you have developed a good perception of the new seat, walk down to the local hardware or plumbing store to buy it. Invite any possible recommendation from the salesperson and make sure that you don't compromise on quality front.
Move to your toilet to detach the old or broken toilet seat. In order to do so, pick up the toilet seat from it's front and make it stand to the cistern. Bend down a bit to locate the bolts that connect the toilet seat to the lower ceramic bowl. If the bolts are of plastic then use an adjustable wrench to loosen them a bit. If however the bolts are of metal then loosen them a bit with the appropriate screwdriver and hand-loosen them thereafter.
If some problem is encountered during the detachment then apply some lubricant onto the bolts and try unscrewing them again after some time. Sometimes the nuts located on the underside turn along with the bolts. To hold the nuts in place while the bolts are unscrewed, use a plier. The plier will prevent the nut from turning along with the threads of the bolt.
Due to rust and decomposition of the structure, sometimes the metal nuts are hard to undone. In such a case, cut the screws with the help of a hacksaw. Before using the hacksaw make sure that the adjoining toilet setup (cistern and bowl) is well covered by the masking tape.
Once screws are removed, lift the seat gently to disconnect it from the toilet bowl. Place the new seat on the bowl. Tighten the bolts and the nuts and finish off the assignment.
About the Author Scott Rodgers is a noted author who has been providing great guidance on plumbing works all over the country. His splendid knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Armona Plumbers (Need one? click here!) to Orosi Plumbers (Need one? click here!).
|
 |
Please Rate: |
|
Rating: |
 Processing ... |
(Average: Not rated) |
| Views: | 9 | |
|
| More Articles from Gardening | | |
| Top Articles in Gardening | | |
|
